Block Jumbo

Autoclaved Aerated Concrete Block

ADVANTAGES

  • International Standards.
  • Eco-friendly.
  • Light but strong
  • Precision.
  • Good sound & thermal insulation.
  • Fast and easy to install.
  • Shape is not curved.
  • Economical.
  • Non toxic.
  • Fireproof.

  • Prepare footplate and foundation. Pull a thread between the corners of the wall, use a waterpass. Then prepare a Powerbond PRO-788R SCREED for the floor base. Apply evenly to the floor surface.

  • Place the Powerblock AAC Block above the Powerbond PRO-788R SCREED mixture. Press until the thickness of the Powerbond PRO-788R SCREED mixture levels with the surface of the thread. Double-check block alignment with waterpass.

  • Mix the Powerbond THIN BED MORTAR with water in a bucket. Stir with mixer until it blends.

  • Stick the vertical part of the block with Powerbond THIN BED MORTAR. Place the blocks on each end of the wall, then double-check with water pass.

  • Clean the surface of the blocks every time you install a new layer. Pull the thread to align the wall and use the trowel in accordance with the block’s width. Apply Powerbong THIN BED MORTAR in the vertically, then horizontally. Make sure the entire surface of the blocks are covered with the mixture.

  • Lift the surface that is facing the vertical groove. Place the opposite side of the block first. Tighten the block with a rubber hammer. Keep the thickness of the adhesive at + 3 mm.

  • Clean the excess Powerbond THIN BED MORTAR with a trowel. Use the excess mixture to patch hollow blocks.

Video Demo Pemasangan